...The radios we'll always remember

Fair Radio Announces it is Closing by the end of 2023


General Information 0 Comments 08/214/2023 


 Content Source

Posted By: Robert Nickels (W9RAN)
Posted on 08/214/2023

After letting Hamvention-week faithfuls know his plans in May, Phil posted the following on the Fair Radio website today (8/2/23):

After being in the surplus electronic military surplus business over 50 years I
have decided it’s time to retire and close the business. Fair Radio Sales
 has over 30,000 sq ft of electronic parts and equipment that must go.
Over the next several months plan your visit to Fair Radio to stock up on electronic
parts, equipment, manuals, vacuum tubes and one of a kind items at
lower than hamfest prices.   Buy an item, a pallet, or a truckload. 
Come and make a deal.  Cash and carry

WWW.FAIRRADIO.COM


   

On the workbench
Posted: 08/226/2024
Comments: 0
Making SMT "no lead" parts easier to use

...  READ MORE

Monitoring Post
Posted: 04/93/2024
Comments: 0
Skyking Skyking do not answer. Message follows...

Anyone who caught one of the Emergency Action Notifications (EAN) transmitted by the US Air Force on the HF bands remembers this phrase.But not many know how the EAN is actually used by our military.   This re-creation of a Minuteman III Launch Control Facilitliy (LCF) in Utah provides a realistic view of what happens when an EAN is received by a missile control crew,  60 feet under...  READ MORE

On the workbench
Posted: 01/22/2024
Comments: 0
Grind your own?

If you're a long-time ham you might know what the smeary figure-8 pattern is....Back in the Novice era,  many used crystals purchased from suppliers like JAN Crystals who purchased large quantities of military surplus crystals and reground them for the ham bands.   That's why they were cheap, but also why you couldn't get a specific frequency as they'd grind by a formula and is long...  READ MORE

Heat up the iron
Posted: 12/364/2023
Comments: 0
K5HZ's "AC-2" Compactron transmitter

Ron K5HZ has been building equipment since he first got his ham license in the early 60s, and while he has other transmitters, all it took to build a new one was finding a "free to good home" power transformer at a hamfest.    It also gave him a chance to try using a couple of Compactron tubes that had caught his eye - the 6T10 dual pentode and the 6GE5 beam power pentode that was d...  READ MORE

Brass Pounding
Posted: 12/341/2023
Comments: 0
DigiKeyer

If you build almost anything electronic, chances are good you've purchased parts from DigiKey Electronics.  But did you know that DigiKey - now one of the world's largest electronics distributors - started out as a ham radio company?"More than 50 years ago, a digital electronic device designed to generate uniform Morse characters and spaces was made available for sale by amateur radio enthusi...  READ MORE

Looking Back
Posted: 11/332/2023
Comments: 0
Heathkit - An Employee Looks Back

Electronic Design magazine published an excellent interview in 2020 with Chas Gilmore W8IAI, former Heath engineer, manager, and executive.   Anyone with an interest in Heathkits will find this interview to be well worth the time to read. You can read it for free without registration here at the ELECTRONIC DESIGN WEBSITEThe photo below was borrowed from W8IAI's QRZ page, and shows h...  READ MORE

On the workbench
Posted: 11/320/2023
Comments: 0
Fusing the DX-40

Upon examining a DX-40 given to me by a good friend, I was surprised not to find the usual fused plug on the AC line cord.   I thought maybe Heathkit realized the error of their ways and had put one inside - but no.  A check of the schematic confirmed that fuses were never a part of the DX-40 design.    This needed to be corrected but after first considering hogging a...  READ MORE

Heat up the iron
Posted: 11/312/2023
Comments: 0
KA8WQL's "Trifecta Receiver"

In racing, a trifecta is "a run of three wins or grand events."    When I read the first sentence of Bob KA8WQLs article about his homebrew receiver,  the word trifecta came to mind because he managed to do all three things at the same time!   I think you'll agree!I read once, a long time ago, that the Radio Amateur should have three stations: one that looks good, one...  READ MORE

Tech Library
Posted: 11/311/2023
Comments: 0
EIA Codes - a clue to "who made what"

Although Source Codes ceased with the 2001 edition, it is available here for historical purposes.The EIA Source Code is a numeric symbol that was assigned and registered by the Electronic Industries Association (EIA) that could be stamped or marked on any or all products to identify the production source or the vendor assuming product responsibility.In addition, the EIA code provided for adding nu...  READ MORE

Tech Library
Posted: 10/302/2023
Comments: 0
David Gleason is an unsung hero

While working as a Univision programming and research exec in the early 2000, David Gleason began digitizing publications about the radio and TV business and posting them on his personal website so that he could easily share them as he traveled around and met with station staff.It was helpful in persuading the locals to take his advice, he says. “Rather than it just sounding like my opinion,...  READ MORE

Looking Back
Posted: 10/276/2023
Comments: 0
John Wells, Cliff Harvey, and the Harvey-Wells Electronics Company

Through the courtesy of the author,  Hamilton K.  Agnew,  it's a pleasure to share this history of one of ham radios pioneering companies - Harvey Wells Electronics.     The company was a very important contributor to world-wide electronics, both during WWII and many years after, as well as a substantial manufacturer of ham radio equipment.Download it from the link at the ...  READ MORE

Tech Library
Posted: 08/234/2023
Comments: 0
Ballast Tube data and substitutions

Here's some information that isn't often needed, but difficult to find:   A. P. Jacobi's Ballast Tube Handbook and Substitution Guide.    Download from the "Attachments" link below....  READ MORE

Tech Library
Posted: 08/214/2023
Comments: 0
Electricity Explained

We've heard there is some confusion about how electricity works.   This should clear things up....  READ MORE

Brass Pounding
Posted: 06/172/2023
Comments: 0
A Poem about Morse Code

A member of the Long Island CW Group thought he'd give one of those AI chatbot sites a challenge...he didn't expect much but got a real surprise... In a world of signals, hidden and grand,A language of dots and dashes, hand in hand.Morse code whispers, in rhythm and sound,A symphony of messages, profound. With a simple click, a dot appears,A fleeting moment, to the listening ears.Short a...  READ MORE

Looking Back
Posted: 06/171/2023
Comments: 0
The History of the Car Radio

Seems like cars have always had radios, but they didn't. Here's the story:One evening, in 1929, two young men named William Lear and Elmer Wavering drove their girlfriends to a lookout point high above the Mississippi River town of Quincy, Illinois, to watch the sunset. It was a romantic night to be sure, but one of the women observed that it would be even nicer if they could listen to music in th...  READ MORE

Looking Back
Posted: 06/171/2023
Comments: 0
History of the Car Radio

Seems like cars have always had radios, but they didn't.   Here's the story:     One evening, in 1929, two young men named William Lear and Elmer Wavering drove their girlfriends to a lookout point high above the Mississippi River town of Quincy, Illinois, to watch the sunset.  It was a romantic night to be sure, but one of...  READ MORE

Tech Library
Posted: 05/125/2023
Comments: 0
DIY Layout Creator

If you're like most homebrewers, often times you just want to build a one-time-only circuit and end up with a haphazard layout or one you have to tear apart and start over on to get everything to fit.   DIY Layout Creator is designed for just this purpose!   Not only do you get a layout that will work but a document that shows what you did so when you come back to it 3 weeks la...  READ MORE

Tech Library
Posted: 04/105/2023
Comments: 0
Minimalist QRP Book by IZ3AYQ

Everyone probably remembers building - or at least thinking about building - a small simple transmitter or receiver from an article in one of the radio magazines.     They may not have used the term "minimalist" back then but the idea was the same - no frills, just a simple rig that could be easily assembled and was capable of being used on the air.   Nowadays, QRP operati...  READ MORE

Monitoring Post
Posted: 04/91/2023
Comments: 0
The NEW WBCQ - 9330 kHz - Last Chance Radio superstation

Everyone who listens to shortwave is familiar with WBCQ, Monticello Maine USA aka "the Planet" and it's owner Allan Weiner who has been a legit broadcaster for many years after a youthful flirtation with pirate radio.   But if you think WBCQ is a rag-tag collection of old SW transmitters held together by baling wire attached by Timtron - you are WAY out of calibration!   &...  READ MORE

Welcome to the Shack
Posted: 03/89/2023
Comments: 0
Mr. Harvey Wells, Kelley W8GFG (SK)

Long-time particpants in the Midwest Classic Radio Net will remember Kelley W8GFG, who was always looking for "anything Harvey Wells".    We lost Kelley too young in 2011 but his persistent quest from St. John IN is an abiding memory.  I remember meeting him at a Chicago area hamfest and asking if he had any spare Harvey Wells speakers.   He said no, they were very ra...  READ MORE